Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. SEPARATE VANITY LIGHT ASSEMBLY
(a) Using a moulding remover, disengage the claw to separate the vanity light assembly. | |
2. REMOVE VANITY LIGHT BULB
(a) Remove the vanity light bulb from the bulb holder as shown in the illustration.
Remove in this Direction |
3. INSTALL VANITY LIGHT BULB
(a) Install the vanity light bulb to the bulb holder as shown in the illustration.
Install in this Direction |
4. INSTALL VANITY LIGHT ASSEMBLY
(a) Engage the claw to install the vanity light assembly. | |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Cornering Light Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during cornering light assembly (fog light assembly) removal/installation are shown below. Necessary Procedure ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Automatic Transaxle System: Input/Turbine Speed Sensor "A" Circuit Short to Battery (P071512,P071514,P071531)
DESCRIPTION The transmission revolution sensor (NT) detects the input shaft rotation speed and sends it to the ECM. Based on the transmission revolution sensor (NT) signal and the transmission revolution sensor (NC3 and NC) signals, the ECM controls engine torque and shift timing. Based on the input ...