REMOVAL
PROCEDURE
1. REMOVE REAR CONSOLE UPPER PANEL
Click here
2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
6. REMOVE CONSOLE PANEL SUB-ASSEMBLY
Click here
7. REMOVE REAR CONSOLE BOX GARNISH
Click here
8. REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the No. 2 power outlet socket assembly as shown in the illustration.
| *a | Protective Tape |
| Remove in this Direction |
9. REMOVE NO. 2 POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the No. 2 power outlet socket cover as shown in the illustration.
| Remove in this Direction |
Components
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Left Rear Wheel Speed Sensor Signal Stuck Low (C050C23)
DESCRIPTION Refer to DTC C050C1F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area C050C23 Left Rear Wheel Speed Sensor Signal Stuck Low Any of the following is detected:
When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Smart Access System With Push-button Start (for Entry Function): Additional Key cannot be Registered
DESCRIPTION If additional registration is not possible, a malfunction of the electrical key transmitter sub-assembly, certification ECU (smart key ECU assembly), engine switch, No. 2 indoor electrical key antenna assembly (front floor), steering lock ECU (steering lock actuator or upper bracket asse ...