INSTALLATION
PROCEDURE
1. INSTALL NO. 2 POWER OUTLET SOCKET COVER
(a) Engage the 2 claws to install the No. 2 power outlet socket cover as shown in the illustration.
| Install in this Direction |
2. INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY
(a) Engage the claw to install the No. 2 power outlet socket assembly as shown in the illustration.
| Install in this Direction |
3. INSTALL REAR CONSOLE BOX GARNISH
Click here
4. INSTALL CONSOLE PANEL SUB-ASSEMBLY
Click here
5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
7. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
8. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
9. INSTALL REAR CONSOLE UPPER PANEL
Click here
Removal
Center Power Outlet Socket (for Console Box Rear Side)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Black Out Tape (for Rear Door): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during black out tape removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/ ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Steering System: Terminals Of Ecu
TERMINALS OF ECU CHECK POWER STEERING ECU ASSEMBLY *a Component without harness connected (Power Steering ECU Assembly) - - (a) Measure the voltage and resistance according to the value(s) in the table below. NOTICE: When the EPS warning light is illuminated due to a malfunction, the fa ...