Components
COMPONENTS
ILLUSTRATION
| *1 | CONSOLE REAR END PANEL SUB-ASSEMBLY | *2 | NO. 3 USB CHARGER SOCKET |
Removal
REMOVAL
PROCEDURE
1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here
2. REMOVE NO. 3 USB CHARGER SOCKET
(a) Disengage the 4 claws and remove the No. 3 USB charger socket as shown in the illustration.
| Remove in this Direction |
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 3 USB CHARGER SOCKET
(a) Engage the 4 claws to install the No. 3 USB charger socket as shown in the illustration.
| Install in this Direction |
2. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here
InstallationLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Differential Mount Cushion: Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear No. 2 differential mount cushion replacement are shown below. Necessary Procedures After Parts ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Steering System: PIG Power Supply Voltage (C1552,C1554)
DESCRIPTION If a problem occurs in the system, the power source relay circuit and the motor relay circuit are shut off to stop power assist. The ECU must be replaced when there is a problem with the relays because the relays are built into the ECU. DTC No. Detection Item DTC Detection Conditi ...