COMPONENTS
ILLUSTRATION
*A | except TMMC Made | *B | for TMMC Made |
*1 | DECK BOARD ASSEMBLY | *2 | DECK SIDE TRIM BOX RH |
*3 | FRONT DECK FLOOR BOX | *4 | REAR DECK FLOOR BOX |
*5 | REAR FLOOR FINISH PLATE | *6 | REAR NO. 3 FLOOR BOARD |
*7 | REAR NO. 4 FLOOR BOARD | *8 | TONNEAU COVER ASSEMBLY |
ILLUSTRATION
*1 | DECK TRIM SIDE PANEL ASSEMBLY LH | *2 | NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY |
*3 | NO. 1 LUGGAGE COMPARTMENT TRIM HOOK | *4 | REAR DOOR SCUFF PLATE LH |
*5 | REAR FLOOR FINISH SIDE PLATE LH | *6 | REAR SEAT SIDE GARNISH LH |
*7 | ROPE HOOK ASSEMBLY | *8 | UPPER QUARTER TRIM PAD LH |
ILLUSTRATION
*1 | REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY | *2 | REAR POWER OUTLET SOCKET COVER |
*3 | CLAMP | - | - |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Ultrasonic Sensor (for Rear): Installation
INSTALLATION PROCEDURE 1. INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER HINT:
Perform this procedure only when replacement of the rear corner ultrasonic sensor retainer is necessary.
If a rear corner ultrasonic sensor retainer has been removed, replace it with a new one. Install the rear corne ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Light Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY Click here 2. REMOVE REAR LIGHT ASSEMBLY (for Bulb Type Turn Signal Light) (a) Disconnect the ...