TERMINALS OF ECU
MOBILE WIRELESS CHARGER CRADLE ASSEMBLY
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: When the engine switch is turned from off to on (ACC), the mobile wireless charger cradle assembly monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the engine switch is turned from off to on (ACC) again.
*2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal | ||||
| J78-1 (PGND) - Body ground | W-B - Body ground | Ground | Always | Below 1 V |
| J78-5 (ACC) - J78-1 (PGND) | R - W-B | Power source (ACC) | Engine switch on (ACC) | 11 to 14 V |
| Engine switch off | Below 1 V | |||
| J78-6 (B+) - J78-1 (PGND) | SB - W-B | Power source (+B) | Always | 11 to 14 V |
| J78-7 (DIS) - Body ground | V - Body ground | Charging suspension signal | For 5 seconds after turning engine switch from off to on (ACC)*1 | 4.5 to 6.0 V |
| Device being charged | Below 1 V | |||
| Charging suspended due to smart entry and start system status*2 | 4.5 to 6.0 V | |||
| J78-9 (ILL-) - Body ground | G - Body ground | Illumination (rheo stat) signal | Light control switch in off position | Below 1 V |
| Light control switch in tail or head position | Pulse generation | |||
| J78-10 (TAIL) - Body ground | BE - Body ground | Illumination signal | Light control switch in off position | Below 1 V |
| Light control switch in tail or head position | 11 to 14 V | |||
Problem Symptoms Table
Wireless Charger Power Source CircuitLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Washer Motor: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL RH Click here 2. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH HINT: Use the same procedure as for the LH side. Click here 3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (a) Remove the 2 screws and front wheel opening extension pad RH. 4. REM ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Air Conditioning Unit: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 2 AIR CONDITIONING HARNESS ASSEMBLY (a) Engage the 2 claws to install the No. 2 air conditioning harness assembly. 2. INSTALL REAR EVAPORATOR SUB-ASSEMBLY (a) Install the rear evaporator sub-assembly as shown in the illustration. Install in t ...