Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Initialization

INITIALIZATION

STEERING SENSOR ZERO POINT CALIBRATION

(a) Start the engine.

(b) Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more.

(c) Turn the engine switch off.

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the pre-collision system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

    Utility
    UTILITY NOTICE: If any of the following parts have been replaced, perform beam/optical axis learning. Otherwise all systems that use the parts may be affected. Forward Recognition Camera: HINT: For ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blower Motor Controller: Removal
    REMOVAL PROCEDURE 1. REMOVE REAR NO. 2 SEAT ASSEMBLY Click here 2. REMOVE REAR FLOOR FINISH PLATE Click here 3. REMOVE REAR DOOR SCUFF PLATE RH HINT: Use the same procedure as for the LH side. Click here 4. REMOVE REAR DOOR INSIDE SCUFF PLATE RH HINT: Use the same procedure as for the LH sid ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Smart Access System With Push-button Start (for Start Function): System Voltage or GND Energization Malfunction (B228B)
    SYSTEM DESCRIPTION This DTC is stored when there is a malfunction in the certification ECU (smart key ECU assembly) battery power supply circuit or ground circuit. DTC No. Detection Item DTC Detection Condition Trouble Area Note B228B System Voltage or GND Energization Malfunction ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0148