DESCRIPTION
With the engine switch on (IG) and the driver door closed, pressing the manual lock or unlock switch on the multiplex network master switch assembly while holding a seat memory switch LH (M1, M2 or M3 switch) will register the transmitter recognition code into the seat memory switch LH that was pressed. After registration is completed, the answer back buzzer sounds.
CAUTION / NOTICE / HINT
NOTICE:
If a memorizing operation has failed, release all of the switches. The seat memory function will not operate unless the switches are released.
If a restoring operation has failed, release all of the switches. The seat memory restoring function will not operate unless the switches are released.
Click here
PROCEDURE
1. | CHECK POWER DOOR LOCK CONTROL SYSTEM |
(a) Check the manual lock/unlock function by using the door control switch (multiplex network master switch assembly).
Click here
OK:
Manual lock/unlock function operates normally.
NG | GO TO POWER DOOR LOCK CONTROL SYSTEM |
|
2. | CHECK SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) |
(a) Check that the engine starts normally when the engine switch is pressed while carrying the electrical key transmitter sub-assembly and with the brake pedal depressed.
OK:
Engine starts normally.
NG | GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) |
|
3. | CHECK SEAT POSITION MEMORY AND RESTORING FUNCTION |
(a) Check the seat position memory and restoring functions.
Click here
Result | Proceed to |
---|---|
OK | A |
NG (seat position memory function does not operate normally) | B |
NG (seat position restoring function does not operate normally) | C |
B | GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat Position is not Memorized) |
C | GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat does not Return to Memorized Position) |
|
4. | READ VALUE USING TECHSTREAM (DRIVER DOOR COURTESY SWITCH) |
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
FL Door Courtesy SW | Front door courtesy light switch assembly (driver door) signal | ON or OFF | ON: Driver door open OFF: Driver door closed | - |
Tester Display |
---|
FL Door Courtesy SW |
OK:
On the Techstream screen, ON or OFF is displayed accordingly.
NG | GO TO LIGHTING SYSTEM (Door Courtesy Switch Circuit) |
|
5. | CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION) |
(a) Check the memory registration of the memory call function.
Click here
OK:
Memory registration operates normally.
NG | GO TO STEP 8 |
|
6. | READ VALUE USING TECHSTREAM (MEMORY CALL REGISTRATION) |
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
Mem SW No. w/KeyID1 | Memory switch linked with key ID1 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID1 MEM SW1: M1 switch linked with key ID1 MEM SW2: M2 switch linked with key ID1 MEM SW3: M3 switch linked with key ID1 | - |
Mem SW No. w/KeyID2 | Memory switch linked with key ID2 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID2 MEM SW1: M1 switch linked with key ID2 MEM SW2: M2 switch linked with key ID2 MEM SW3: M3 switch linked with key ID2 | - |
Mem SW No. w/KeyID3 | Memory switch linked with key ID3 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID3 MEM SW1: M1 switch linked with key ID3 MEM SW2: M2 switch linked with key ID3 MEM SW3: M3 switch linked with key ID3 | - |
Mem SW No. w/KeyID4 | Memory switch linked with key ID4 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID4 MEM SW1: M1 switch linked with key ID4 MEM SW2: M2 switch linked with key ID4 MEM SW3: M3 switch linked with key ID4 | - |
Mem SW No. w/KeyID5 | Memory switch linked with key ID5 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID5 MEM SW1: M1 switch linked with key ID5 MEM SW2: M2 switch linked with key ID5 MEM SW3: M3 switch linked with key ID5 | - |
Mem SW No. w/KeyID6 | Memory switch linked with key ID6 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID6 MEM SW1: M1 switch linked with key ID6 MEM SW2: M2 switch linked with key ID6 MEM SW3: M3 switch linked with key ID6 | - |
Mem SW No. w/KeyID7 | Memory switch linked with key ID7 | NONE, MEM SW1, MEM SW2 or MEM SW3 | NONE: No switches linked with key ID7 MEM SW1: M1 switch linked with key ID7 MEM SW2: M2 switch linked with key ID7 MEM SW3: M3 switch linked with key ID7 | - |
Tester Display |
---|
Mem SW No. w/KeyID1 |
Mem SW No. w/KeyID2 |
Mem SW No. w/KeyID3 |
Mem SW No. w/KeyID4 |
Mem SW No. w/KeyID5 |
Mem SW No. w/KeyID6 |
Mem SW No. w/KeyID7 |
Driver Seat Memory1 |
Driver Seat Memory2 |
Driver Seat Memory3 |
OK:
A seat position memory switch is linked to the electrical key transmitter sub-assembly.
NG | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
|
7. | CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION AND AUTOMATIC MEMORY CALL FUNCTION) |
(a) Check the memory registration and automatic memory call function of the memory call function.
Click here
OK:
Memory registration and automatic memory call function operate normally.
OK | USE SIMULATION METHOD TO CHECK |
NG | GO TO OTHER DIAGNOSIS PROCEDURE (Wireless-linked Return Function does not Operate) |
8. | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
(a) Replace the main body ECU (multiplex network body ECU) with a new or known good one.
Click here
|
9. | CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION) |
(a) Check the memory registration of the memory call function.
Click here
OK:
Memory registration operates normally.
OK | END (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) WAS DEFECTIVE) |
|
10. | REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY LH |
(a) Replace the position control ECU and switch assembly LH with a new or known good one.
Click here
|
11. | CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION) |
(a) Check the memory registration of the memory call function.
Click here
OK:
Memory registration operates normally.
OK | END (POSITION CONTROL ECU AND SWITCH ASSEMBLY LH WAS DEFECTIVE) |
NG | REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Spiral Cable: Components
COMPONENTS ILLUSTRATION *A w/o Heated Steering Wheel System and Pre-collision System *B w/ Heated Steering Wheel System or Pre-collision System *1 LOWER STEERING COLUMN COVER *2 SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY *3 UPPER STEERING COLUMN COVER - - N*m (kgf*cm, ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Occupant Classification System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be dis ...