REMOVAL
PROCEDURE
1. REMOVE REAR CONSOLE UPPER PANEL
Click here
2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
6. REMOVE CONSOLE PANEL SUB-ASSEMBLY
Click here
7. REMOVE REFRESHING SEAT SWITCH
| (a) Disengage the 4 claws to remove the refreshing seat switch from the console panel sub-assembly. |
|
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Drive Shaft Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR DRIVE SHAFT SNAP RING (a) Install a new rear drive shaft snap ring. NOTICE: Face the end gap of the rear drive shaft snap ring ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Torque Control Awd System: Lost Communication with ECM / PCM "A" (U0100,U0126,U0129)
DESCRIPTION The 4WD ECU assembly receives signals from the ECM, skid control ECU (brake actuator assembly) and steering sensor via CAN communication. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor ...