PRECAUTION
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Lane Control System | |
| Pre-collision System | |
| Intelligent Clearance Sonar System | |
| Parking Assist Monitor System | |
| Panoramic View Monitor System | |
| Lighting System (w/ Automatic Headlight Beam Level Control System) | |
| Power Door Lock Control System | |
| Power Back Door System (w/ Outside Door Control Switch) |
Parts Location
System DescriptionLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Control Module Processor System Internal Failure (P060604,P060629,P060647)
MONITOR DESCRIPTION The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from these CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store a DTCs. DTC No. Detection Item DTC Detection ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Brake Control / Dynamic Control Systems: Brake Pedal Load Sensing Switch
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT BRAKE PEDAL SUPPORT ASSEMBLY (a) Make sure that there is no looseness in the locking part and the connecting part of the connector. *a Component without harness connected (Brake Pedal Load Sensing Switch (Brake Pedal S ...