OPERATION CHECK
CHECK FRONT SEAT HEATER
(a) Turn the engine switch on (IG).
(b) Turn the refreshing seat switch (for front side) (heater position) on and check that the indicator illuminates and the surface of the front seat warms up.
(c) Check that the front seat surface temperature changes according to the operation of the refreshing seat switch (for front side) (heater position) as follows: HI → MID → LO.
(d) Set the refreshing seat switch (for front side) to AUTO and check that the seat heater and seat blower operate automatically according to the target outlet air temperature of the air conditioning system.
HINT:
CHECK REAR SEAT HEATER (w/ Rear Seat Heater)
(a) Turn the engine switch on (IG).
(b) Turn the refreshing seat switch (for rear side)*1 or rear seat heater switch*2 (heater position) on and check that the indicator illuminates and the surface of the front seat warms up.
(c) Check that the front seat surface temperature changes according to the operation of the refreshing seat switch (for rear side)*1 or rear seat heater switch*2 (heater position) as follows: HI → MID → LO.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT 2. CUSTOMER PROBLEM ANALYSIS
NEXT 3. CONNECT TECHSTREAM TO DLC3* HINT: If the display indicates a communication malfunction, inspect the DLC ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Torque Control Awd System: AWD Control Switch Circuit
DESCRIPTION The 4WD ECU assembly changes the control mode in response to the "Lock Mode" signal from the AWD lock switch (combination switch assembly). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When the 4WD ECU assembly is replaced with a known good one from another vehicle, it is necessary to ...