Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Inspection

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual / Vehicle Interior / Seat Belt / Front Seat Inner Belt Assembly / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Driver seat belt unfastened

10 kΩ or higher

1 - 2

Driver seat belt fastened

Below 1 Ω

If the result is not as specified, replace the front seat inner belt assembly LH.

*a

Component without harness connected

(Front Seat Inner Belt Assembly LH)

2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Front passenger seat belt unfastened

10 kΩ or higher

1 - 2

Front passenger seat belt fastened

Below 1 Ω

If the result is not as specified, replace the front seat inner belt assembly RH.

*a

Component without harness connected

(Front Seat Inner Belt Assembly RH)
    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fron ...

    Installation
    INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) (a) Install the front seat belt anchor plate as shown in the illustration. Install ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Starter Signal Circuit
    DESCRIPTION While the engine is being cranked, current flows from terminal STAR of the certification ECU (smart key ECU assembly) to the park/neutral position switch assembly and to terminal STA of the ECM (STA signal). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits r ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > 4wd Control Ecu: Installation
    INSTALLATION PROCEDURE 1. PRECAUTION NOTICE: When 4WD ECU assembly is replaced with a known good one from another vehicle, it is necessary to perform calibration. Click here 2. INSTALL 4WD ECU ASSEMBLY (a) Install the 4WD ECU assembly with the bolt. Torque: 8.5 N·m {87 kgf·cm, 75 in·lbf} ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0133