INSTALLATION
PROCEDURE
1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Install the rear center seat inner belt assembly with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the rear center seat inner belt assembly to overlap the protruding part of the seatback frame. |
|
(b) Engage the clamp.
(c) Connect the connector.
2. INSTALL REAR SEAT ASSEMBLY LH
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Steering System: Assist Map Number Mismatch (C1582)
DESCRIPTION When an incorrect ECM, main body ECU (multiplex network body ECU) or skid control ECU (brake actuator assembly) is installed after the assist map has been written to the power steering ECU assembly, DTC C1582 is stored because the information stored in the power steering ECU assembly doe ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Climate Control Seat System: Terminals Of Ecu
TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the J43 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. ...