ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the instrument panel passenger airbag assembly.
PROCEDURE
1. INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the instrument panel passenger airbag assembly installed to the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the instrument panel safety pad sub-assembly with a new one.
2. INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the instrument panel passenger airbag assembly removed from the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the instrument panel passenger airbag assembly, instrument panel safety pad sub-assembly or instrument panel reinforcement sub-assembly with a new one.
Components
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sliding Roof Housing (for Panoramic Moon Roof): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR SLIDING ROOF GARNISH (a) Engage the 3 guides and 4 claws to install the rear sliding roof garnish to the sliding roof housing panel. 2. INSTALL NO. 1 SLIDING ROOF SIDE GARNISH LH (a) Clean the sliding roof housing panel. (1) Using a heat light, hea ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Intelligent Clearance Sonar System: System Description
SYSTEM DESCRIPTION CASES OF UNNECESSARY INTELLIGENT CLEARANCE SONAR SYSTEM OPERATION (a) In the following situations, the intelligent clearance sonar system may operate even when there is no possibility of a collision: (1) Environmental influence
There is an obstacle on the shoulder of the road ( ...