SYSTEM DESCRIPTION
GENERAL
(a) The occupant detection ECU estimates the weight of an occupant based on signals received from the 2 occupant classification sensors. The occupant detection ECU determines whether the front passenger seat is occupied and classifies the occupant based on the estimated weight, passenger side buckle switch state, acceleration sensor signal and vehicle speed signal. The result determined by the occupant detection ECU is sent to the airbag sensor assembly via CAN communication.
(b) The airbag sensor assembly controls the operation of the passenger airbag ON/OFF indicator and restricts the operation of the instrument panel passenger airbag assembly and front seat cushion airbag assembly RH.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Mirror (ext): Outer Rear View Mirror Cover
ComponentsCOMPONENTS ILLUSTRATION *1 NO. 1 OUTER MIRROR COVER *2 OUTER MIRROR RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE OUTER MIRROR Click here 2. REMOVE NO. ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Airbag System: Short in Knee Airbag (D Side) Squib Circuit (B1860-B1863)
DESCRIPTION The driver side knee airbag squib circuit consists of the airbag sensor assembly and lower No. 1 instrument panel airbag assembly. The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs are stored when a malfunction is detected in ...