INSPECTION
PROCEDURE
1. INSPECT QUARTER SIDE SPEAKER ASSEMBLY
(a) With the speaker installed, check that there is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.
(c) Measure the resistance of the speaker. Standard Resistance:
If the result is not as specified, replace the speaker. |
|
(d) When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.
HINT:
Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor Sensor: Components
COMPONENTS ILLUSTRATION *1 BLIND SPOT MONITOR SENSOR LH *2 BLIND SPOT MONITOR SENSOR RH N*m (kgf*cm, ft.*lbf): Specified torque - - ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Integration Relay: Inspection
INSPECTION PROCEDURE 1. INSPECT SEMICONDUCTOR POWER INTEGRATION ECU (a) IG2 RELAY: (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition B-1 - 1F-4 Battery voltage not applied between terminals ...