REMOVAL
PROCEDURE
1. REMOVE TONNEAU COVER ASSEMBLY
Click here
2. REMOVE DECK BOARD ASSEMBLY
Click here
3. REMOVE REAR DECK FLOOR BOX
Click here
4. REMOVE REAR NO. 4 FLOOR BOARD
Click here
5. REMOVE FRONT DECK FLOOR BOX
Click here
6. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Disconnect the connector.
| Remove in this Direction |
(b) Disengage the clamp to remove the No. 3 indoor electrical key antenna assembly as shown in the illustration.
NOTICE:
Be careful when removing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.
Components
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Ground (P032511,P033011)
DESCRIPTION A flat-type knock control sensor (non-resonant type) has a structure that can detect vibrations between approximately 5 kHz and 15 kHz. The knock control sensor is fitted onto the engine block to detect engine knocking. The knock control sensor contains a piezoelectric element which gene ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Smart Access System With Push-button Start (for Entry Function): Additional Key cannot be Registered
DESCRIPTION If additional registration is not possible, a malfunction of the electrical key transmitter sub-assembly, certification ECU (smart key ECU assembly), engine switch, No. 2 indoor electrical key antenna assembly (front floor), steering lock ECU (steering lock actuator or upper bracket asse ...