INSTALLATION
PROCEDURE
1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Engage the clamp to install the No. 3 indoor electrical key antenna assembly as shown in the illustration.
| Install in this Direction |
NOTICE:
Be careful when installing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL FRONT DECK FLOOR BOX
Click here
3. INSTALL REAR NO. 4 FLOOR BOARD
Click here
4. INSTALL REAR DECK FLOOR BOX
Click here
5. INSTALL DECK BOARD ASSEMBLY
Click here
6. INSTALL TONNEAU COVER ASSEMBLY
Click here
Removal
Electrical Key Oscillator(for Rear Floor)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Telematics System: How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the telematics system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT 2. CUSTOMER PROBLEM ANALYSIS HINT:
In troubleshooting, check that the problem symptoms h ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 12.3 Inch Display): AVC-LAN Circuit
DESCRIPTION Each unit of the audio and visual system connected to the AVC-LAN (communication bus) transmits switch signals via AVC-LAN communication. If a short to +B or short to ground occurs in the AVC-LAN, the audio and visual system will not function normally because communication is not possibl ...