PROBLEM SYMPTOMS TABLE
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| Security indicator light does not blink | Proceed to "Security Indicator Light Does not Blink" | |
| Immobiliser system does not operate properly | Proceed to "Immobiliser System does not Operate Properly" | |
| Engine cannot be started*1 | Certification ECU (Smart key ECU assembly) | |
| ECM | - | |
| SFI system | - | |
| Power source mode cannot be changed*1 | Engine switch | |
| Certification ECU (Smart key ECU assembly) | - | |
| Steering lock lock/unlock not possible*2 | Steering lock ECU (Steering lock actuator or upper bracket assembly) | |
| Engine cannot be started by lexus enform remote (Engine can be started by push-button start function)*3 | Proceed to "Remote Engine Starter does not Operate" | |
How To Proceed With Troubleshooting
RegistrationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Refrigerant (for Hfo-1234yf(r1234yf)): Precaution
PRECAUTION PRECAUTIONS FOR REFRIGERANT HFO-1234yf (R1234yf) (a) Compatibility (1) The parts used in the refrigerant cycle, the compressor oil, etc. of an HFO-1234yf (R1234yf) system are not compatible with a conventional HFC-134a (R134a) system. (b) HFO-1234yf (R1234yf) Refrigerant (1) Always use HF ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Warning Light Remains ON
DESCRIPTION This procedure is for troubleshooting when the brake warning light remains on but no DTCs are output. The skid control ECU (brake actuator assembly) controls the brake warning light in the combination meter assembly via CAN communication. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: ...