DTC CHECK / CLEAR
NOTICE:
When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Access. While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (POWER SOURCE CONTROL))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
Body Electrical > Power Source Control > Trouble Codes(e) Check for DTCs.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (SMART ACCESS))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.
Body Electrical > Smart Access > Trouble Codes(e) Check for DTCs.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (STARTING CONTROL))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Starting Control / Trouble Codes.
Body Electrical > Starting Control > Trouble Codes(e) Check for DTCs.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (POWER SOURCE CONTROL))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
Body Electrical > Power Source Control > Clear DTCs(e) Clear the DTCs.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (SMART ACCESS))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.
Body Electrical > Smart Access > Clear DTCs(e) Clear the DTCs.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (STARTING CONTROL))
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Starting Control / Trouble Codes.
Body Electrical > Starting Control > Clear DTCs(e) Clear the DTCs.
Diagnosis System
Data List / Active TestLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Wiper Motor: Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE: Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade. PROCEDURE 1. INSTALL WIPER MOTOR WIRE (a) Connect the connector to install the wiper motor wire. 2. ...
Lexus RX (RX 350L, RX450h) 2016-2026 Owners Manual > When trouble
arises: Essential information
Emergency flashers
The emergency flashers are used to warn other drivers when the vehicle
has
to be stopped on the road due to a breakdown, etc.
Press the switch.
All the turn signal lights will flash. To turn
them off, press the switch once again.
■ Emergency flashers
If the emergenc ...