DESCRIPTION
This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.
HINT:
The main body ECU (multiplex network body ECU) controls the front power seat control system (w/ Memory) related items that are customizable via the multi-display assembly screen.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15F8 | D-Seat ECU Vehicle Information Reading/Writing Process Malfunction | Main body ECU (multiplex network body ECU) vehicle setting processing malfunction |
|
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
PROCEDURE
| 1. | CHECK CAN COMMUNICATION SYSTEM |
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
OK:
CAN communication DTCs are not output.
| NG | | GO TO CAN COMMUNICATION SYSTEM |
|
| 2. | CHECK FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) |
(a) Check if the front power seat control system (w/ Memory) is malfunctioning.
Click here
HINT:
Customization may not be possible depending on the malfunction in the front power seat control system (w/ Memory).
OK:
No malfunctions are present in the front power seat control system (w/ Memory).
| NG | | GO TO FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) |
|
| 3. | CLEAR DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
|
| 4. | CHECK FOR DTC |
(a) Recheck for DTCs.
Body Electrical > Navigation System > Trouble Codes| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
| A | | END |
| B | | REPLACE RADIO RECEIVER ASSEMBLY |
Certification ECU Vehicle Information Reading/Writing Process Malfunction (B15F7)
XM Tuner Antenna Disconnected (B15FE,B15FF)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Camshaft Oil Control Valve (for Bank 2): Installation
INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT TIMING GEAR BOLT (for Intake Side of Bank 2) NOTICE: There are different types of camshaft timing gear bolts. Make sure to check the identification mark to determine the tightening torque. *a Identification Mark Stamp Identification Mark Item ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Canister: Installation
INSTALLATION PROCEDURE 1. INSTALL CHARCOAL CANISTER LEAK DETECTION PUMP SUB-ASSEMBLY HINT: Only perform this procedure when replacement of the charcoal canister leak detection pump sub-assembly is necessary. (a) Engage the 2 claws to install a new charcoal canister leak detection pump sub-assembl ...