DESCRIPTION
If DTC U1000 is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U1000 | CAN Communication Failure (Message Registry) | ECU malfunction | Parking assist ECU |
PROCEDURE
| 1. | CHECK FOR DTC |
(a) Clear the DTCs.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs(b) Check for DTCs.
Chassis > Circumference Monitoring Camera Control Module > Trouble CodesOK:
DTC U1000 is not output.
HINT:
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even if the DTC was not output when rechecking for DTCs.
Click here
| OK | | USE SIMULATION METHOD TO CHECK |
| NG | | REPLACE PARKING ASSIST ECU |
Control Module Communication Bus Off (U0073,U0100,U0126,U0129,U0140,U0163,U0233,U0265-U0268,U1110)
"CHK" message(s) are displayed on the SIGNAL CHECK screen.Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Check Bus 3 Line for Short to GND
DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 6 (CA3H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 21 (CA3L) of the network gateway ECU and terminal 4 (CG) of the DLC3. Symptom Trouble A ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Power Seat Control System (w/ Memory): Power Seat Position is not Memorized
DESCRIPTION The main body ECU (multiplex network body ECU) receives seat memory switch LH signals from the outer mirror control ECU assembly via CAN communication. If the SET switch is being pressed when one of the M1, M2 or M3 switches is pressed, or if one of the M1, M2 or M3 switches is pressed w ...