PROBLEM SYMPTOMS TABLE
If there are no DTCs output and the problem still occurs, check the suspected areas for each problem symptom in the order given in the following table and proceed to the relevant troubleshooting page.
NOTICE:
When replacing the skid control ECU (brake actuator assembly), sensors, etc., turn the engine switch off.
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| ABS warning light abnormal (Remains on) | Refer to the procedure for "ABS Warning Light Remains ON" | |
| ABS warning light abnormal (Does not come on) | Refer to the procedure for "ABS Warning Light does not Come ON" | |
| Brake system warning light abnormal (Remains on) | Refer to the procedure for "Brake Warning Light Remains ON" | |
| Brake system warning light abnormal (Does not come on) | Refer to the procedure for "Brake Warning Light does not Come ON" | |
| Brake hold standby indicator light abnormal | Refer to the procedure for "Brake Hold Standby Indicator Light Circuit" | |
| Brake hold operated indicator light abnormal | Refer to the procedure for "Brake Hold Operated Indicator Light Circuit" | |
| Slip indicator light abnormal (Remains on) | Refer to the procedure for "Slip Indicator Light Remains ON" | |
| Slip indicator light abnormal (Does not come on) | Refer to the procedure for "Slip Indicator Light does not Come ON" | |
| TRAC does not operate | Refer to the procedure for "TRAC does not Operate" | |
| Excessive brake pedal travel (No fluid leaks and no air in system) | Refer to the procedure for "Excessive Brake Pedal Travel (No Fluid Leaks and No Air in System)" | |
| ABS operates before necessary when braking | Refer to the procedure for "ABS Operates Before Necessary When Braking" | |
| VSC does not operate or VSC does not operate correctly | Refer to the procedure for "VSC does not Operate or VSC does not Operate Correctly" | |
| Brake actuator operation sound is loud during initial check | Refer to the procedure for "Brake Actuator Operation Sound is Loud during Initial Check" | |
| VSC OFF switch (Combination switch assembly) abnormal | Refer to the procedure for "VSC OFF Switch Circuit" | |
Test Mode Procedure
Terminals Of EcuLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Integration Relay: Installation
INSTALLATION PROCEDURE 1. INSTALL SEMICONDUCTOR POWER INTEGRATION ECU (a) Connect the 5 connectors. (b) Engage the 2 claws to install the semiconductor power integration ECU as shown in the illustration. Install in this Direction 2. INSTALL NO. 1 RELAY BLOCK COVER (a) Engage the 2 guides a ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Tilt And Power Telescopic Steering Column System: Fail-safe Chart
FAIL-SAFE CHART HINT: If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic o ...