REASSEMBLY
PROCEDURE
1. INSTALL VACUUM PUMP VANE (for TMC Made)
(a) Apply engine oil to the vacuum pump vane and vacuum pump vane caps and install the vacuum pump vane caps to the vacuum pump vane.
(b) Apply engine oil to the vacuum pump vane with vacuum pump vane caps and install it to the vacuum pump housing.
NOTICE:
When reusing the vacuum pump vane and 2 vacuum pump vane caps, install them in the same position and orientation as when they were removed.
2. INSTALL END COVER (for TMC Made)
| (a) Install a new No. 1 O-ring to the vacuum pump housing. NOTICE:
|
|
(b) Using a T30 "TORX" socket wrench, install the end cover with 5 new screws.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
NOTICE:
| (c) Turn the coupling clockwise as shown in the illustration and check that the coupling is not stuck or that there is no abnormal resistance. |
|
Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Tilt And Power Telescopic Steering Column System: Fail-safe Chart
FAIL-SAFE CHART HINT: If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic o ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Brake Control / Dynamic Control Systems: Brake Hold Switch
ComponentsCOMPONENTS ILLUSTRATION *1 BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) *2 CONSOLE PANEL SUB-ASSEMBLY RemovalREMOVAL PROCEDURE 1. PRECAUTION Click here 2. REMOVE CONSOLE PANEL SUB-ASSEMBLY Click here 3. REMOVE BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWIT ...