REMOVAL
PROCEDURE
1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
Click here
2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY
Click here
3. REMOVE VACUUM WARNING SWITCH ASSEMBLY (for TMC Made)
| (a) Disconnect the connector from the vacuum warning switch assembly. |
|
(b) Remove the vacuum warning switch assembly from the brake booster assembly.
4. REMOVE VACUUM WARNING SWITCH ASSEMBLY (for TMMC Made)
| (a) Disconnect the connector from the vacuum warning switch assembly. |
|
(b) Remove the vacuum warning switch assembly from the brake booster assembly.
5. REMOVE CHECK VALVE GROMMET
(a) Remove the check valve grommet from the brake booster assembly.
Installation
Parking BrakeLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): High Beam Headlight Circuit
DESCRIPTION The No. 1 headlight ECU sub-assembly controls the high beam headlights. WIRING DIAGRAM for Multiple Beam Headlight for Single Beam Headlight CAUTION / NOTICE / HINT NOTICE:
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle infor ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Left Rear Wheel Speed Sensor Circuit Short to Ground or Open (C050C14)
DESCRIPTION Refer to DTC C050C1F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area C050C14 Left Rear Wheel Speed Sensor Circuit Short to Ground or Open An open in the speed sensor signal circuit continues for 0.5 seconds or more.
Rear speed sensor LH*1
...