Lexus RX (RX 350L, RX450h) 2016-2022 Repair Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. PRECAUTION

Click here

2. RELEASE PARKING BRAKE

(a) Move the shift lever to P.

(b) Turn the engine switch on (IG).

(c) Operate the electric parking brake switch assembly to release the parking brake.

HINT:

If the parking brake cannot be released:

Click here

(d) Turn the engine switch off.

3. REMOVE REAR WHEEL

Click here

4. DISCONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

(a) Disconnect the No. 2 parking brake wire assembly connector from the parking brake actuator assembly LH.

NOTICE:

  • Remove any dirt or foreign matter on and around the connector before performing this work.
  • Do not allow water, oil or dirt to enter the connector.

5. REMOVE PARKING BRAKE ACTUATOR ASSEMBLY LH

(a) Using a 5 mm hexagon socket wrench, remove the 2 bolts and parking brake actuator assembly LH from the rear disc brake cylinder assembly LH.

NOTICE:

  • Check that there are no brake fluid leaks from the back of the rear disc brake cylinder assembly.
  • If there are any brake fluid leaks, replace the rear disc brake cylinder assembly.

(b) Remove the O-ring from the rear disc brake cylinder assembly LH.

    On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY HINT: Using the Techstream to perform the Active Tests allows relays, VSVs and actuators and other items to be operated witho ...

    Inspection
    INSPECTION PROCEDURE 1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY (a) Parking brake actuator assembly operation inspection (1) Apply voltage to the terminals of the parking brake actuator assembly an ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2022 Repair Manual > Meter / Gauge System: Terminals Of Ecu
    TERMINALS OF ECU COMBINATION METER ASSEMBLY (a) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition J10-2 (MSM+) - Body ground Y - Body ground Steering pad switch si ...

    Lexus RX (RX 350L, RX450h) 2016-2022 Repair Manual > Blind Spot Monitor System: Blind Spot Monitor Master Module Beam Axis Inspection Incomplete (C1ABB)
    DESCRIPTION This DTC is stored when a beam axis adjustment has not been performed for the blind spot monitor sensor LH. HINT: This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis adjustment is performed. Completing the beam axis ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2022 Copyright www.lexusrx.net
    0.0225