REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT LENS AND BODY (for Bulb Type Turn Signal Light)
2. INSTALL REAR COMBINATION LIGHT BRACKET (for Bulb Type Turn Signal Light)
| (a) Install the rear combination light bracket with the screw. |
|
3. INSTALL REAR LIGHT CORD (for Bulb Type Turn Signal Light)
| (a) Connect the connector to install the rear light cord. |
|
(b) Turn the rear light cord as shown in the illustration to connect them as a unit.
| Install in this Direction |
4. INSTALL REAR TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light)
(a) Install the rear turn signal light bulb to the rear light cord.
(b) Turn the rear light cord with the rear turn signal light bulb as shown in the illustration to connect them as a unit.
| Install in this Direction |
5. INSTALL REAR COMBINATION LIGHT CAP (for LED Type Turn Signal Light)
(a) for TMMC Made:
| (1) Install the rear combination light cap. HINT: Use the same procedure for all rear combination light caps. |
|
Inspection
InstallationLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected: System See Procedure Lane Control System Pre-collision System ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Torque Control Awd System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect ...