Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Inspection

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual / Vehicle Exterior / Lighting (ext) / Rear Combination Light Assembly (w/ Rear No. 2 Seat) / Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

(a) Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 3 (E)

Taillight comes on

Battery positive (+) → Terminal 2 (STP)

Battery negative (-) → Terminal 3 (E)

Stop light comes on

Battery positive (+) → Terminal 4 (TRN)

Battery negative (-) → Terminal 3 (E)

Turn signal light comes on*1

Battery positive (+) → Terminal 4 (TRN1) and 6 (TRN2)

Battery negative (-) → Terminal 3 (E)

Turn signal light comes on*2
  • *1: for Turn Signal Light Bulb Type
  • *2: for Turn Signal Light LED Type

If the result is not as specified, replace the rear combination light assembly LH.

*a

Component without harness connected

(Rear Combination Light Assembly LH)

2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

(a) Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 3 (E)

Taillight comes on

Battery positive (+) → Terminal 2 (STP)

Battery negative (-) → Terminal 3 (E)

Stop light comes on

Battery positive (+) → Terminal 4 (TRN1)

Battery negative (-) → Terminal 3 (E)

Turn signal light comes on*1

Battery positive (+) → Terminal 4 (TRN1) and 6 (TRN2)

Battery negative (-) → Terminal 3 (E)

Turn signal light comes on*2
  • *1: for Turn Signal Light Bulb Type
  • *2: for Turn Signal Light LED Type

If the result is not as specified, replace the rear combination light assembly RH.

*a

Component without harness connected

(Rear Combination Light Assembly RH)
    Disassembly
    DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE REAR COMBINATION LIGHT CAP (for LE ...

    Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR COMBINATION LIGHT LENS AND BO ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): Headlight Swivel Motor LH (B2412,B2413,B2417,B2418)
    DESCRIPTION The No. 1 headlight ECU sub-assembly LH sends automatic headlight beam level control signals to each headlight swivel motor and headlight leveling motor via LIN communication. Each No. 1 headlight ECU sub-assembly and headlight swivel motor and headlight leveling motor communicate via LI ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Black Out Tape (for Rear Door): Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during black out tape removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/ ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.009