SYSTEM DIAGRAM
Communication Table | Transmitting ECU | Receiving ECU | Signal | Communication Method |
|---|---|---|---|
|
*1: w/ Optitron Meter Type
*2: w/ TFT Meter Type | |||
| Skid control ECU (Brake actuator assembly) | 4WD ECU assembly |
| CAN communication system |
| ECM | 4WD ECU assembly |
| CAN communication system |
| Main body ECU (Multiplex network body ECU) | 4WD ECU assembly | Parking brake switch signal | CAN communication system |
| 4WD ECU assembly | Combination meter assembly |
| CAN communication system |
| Steering sensor | 4WD ECU assembly | Steering sensor signal | CAN communication system |
| Acceleration sensor (Airbag sensor assembly)*1 Acceleration sensor (Yaw rate sensor assembly)*2 | 4WD ECU assembly |
| CAN communication system |
System Description
CalibrationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Intake Manifold: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during intake manifold removal/installation are shown below. Necessary Procedures After Parts Removed/Installed ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 8 Inch Display): Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier
DESCRIPTION This circuit sends a signal to the stereo component amplifier assembly to mute noise. Due to this, the noise produced by changing the sound source ceases. If there is an open in the circuit, noise can be heard from the speakers when changing the sound source. If there is a short in the c ...