Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Inspection

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual / Drivetrain / U881f (automatic Transmission / Transaxle) / Oil Pump / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

(a) Turn the front oil pump drive gear with 2 screwdrivers and check that it rotates smoothly.

NOTICE:

Be careful not to damage the lip of the front oil pump oil seal.

2. INSPECT CLEARANCE OF FRONT OIL PUMP BODY AND GEAR SUB-ASSEMBLY

(a) Inspect the body clearance:

(1) Pull the front oil pump driven gear to one side of the front oil pump body sub-assembly.

(2) Using a feeler gauge, measure the clearance.

Standard Clearance:

0.12 to 0.17 mm (0.00472 to 0.00669 in.)

Maximum Clearance:

0.17 mm (0.00669 in.)

If the clearance is greater than the maximum, replace the front oil pump drive gear, front oil pump driven gear and front oil pump body sub-assembly.

(b) Inspect the side clearance:

(1) Using a straightedge and feeler gauge, measure the side clearance of both gears.

Standard Side Clearance:

0.025 to 0.04 mm (0.000984 to 0.00157 in.)

Maximum Side Clearance:

0.04 mm (0.00157 in.)

Front Oil Pump Drive Gear Thickness:

Part Number

Mark

Thickness (mm (in.))

35321-48010

A

10.285 to 10.291

(0.40492 to 0.40516)

35321-48020

B

10.292 to 10.298

(0.40520 to 0.40543)

35321-48030

C

10.299 to 10.305

(0.40547 to 0.40571)

35321-48040

D

10.306 to 10.312

(0.40575 to 0.40598)

Front Oil Pump Driven Gear Thickness:

Part Number

Mark

Thickness (mm (in.))

35322-48010

A

10.285 to 10.291

(0.40492 to 0.40516)

35322-48020

B

10.292 to 10.298

(0.40520 to 0.40543)

35322-48030

C

10.299 to 10.305

(0.40547 to 0.40571)

35322-48040

D

10.306 to 10.312

(0.40575 to 0.40598)

If the clearance is greater than the maximum, replace the front oil pump drive gear, front oil pump driven gear and front oil pump body sub-assembly.

3. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

(a) Using a caliper gauge, measure the inside diameter of the front oil pump body sub-assembly bushing.

Standard Inside Diameter:

43.135 to 43.160 mm (1.69822 to 1.69921 in.)

Maximum Inside Diameter:

43.160 mm (1.69921 in.)

If the inside diameter is greater than the maximum, replace the front oil pump body sub-assembly.

4. INSPECT STATOR SHAFT ASSEMBLY

(a) Using a caliper gauge, measure the inside diameter of the stator shaft assembly.

Standard Inside Diameter:

22.500 to 22.526 mm (0.88583 to 0.88685 in.)

Maximum Inside Diameter:

22.526 mm (0.88685 in.)

If the inside diameter is greater than the maximum, replace the stator shaft assembly.
    Oil Pump
    ...

    Components
    COMPONENTS ILLUSTRATION *1 FRONT OIL PUMP OIL SEAL *2 FRONT OIL PUMP BODY O-RING *3 FRONT OIL PUMP BODY SUB-ASSEMBLY *4 FRONT OIL PUMP DRIVEN GEAR *5 FRONT OIL PUMP DRIVE GEA ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Speed Sensor (for 2wd): Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. The rear speed sensor is a component of the rear axle hub and bearing assembly. If the rear speed sensor is malfunctioning, replace the rear axle hub and ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Precaution
    PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected: System See Procedure Lane Control System Pre-collision System ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0159