ON-VEHICLE INSPECTION
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
(a) Turn the engine switch on (IG).
(b) Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.
(c) Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.
If the operation is not as specified, check the park/neutral position switch assembly.
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Door Belt Moulding: Components
COMPONENTS ILLUSTRATION *1 COURTESY LIGHT ASSEMBLY *2 REAR DOOR ARMREST COVER *3 REAR DOOR INNER GLASS WEATHERSTRIP *4 REAR DOOR INSIDE HANDLE BEZEL PLUG *5 REAR DOOR TRIM BOARD SUB-ASSEMBLY *6 REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BAS ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Dynamic Torque Control Awd System: Steering Angle Sensor (C1297)
DESCRIPTION The 4WD ECU assembly determines that the vehicle is turning based on the signals sent from the steering sensor. The steering sensor signal is sent to the 4WD ECU assembly via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area C1297 Steering Angl ...