ON-VEHICLE INSPECTION
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
2. INSPECT SHIFT LEVER POSITION
(a) When moving the shift lever from P to R with the engine switch on (IG) and the brake pedal depressed, check that the shift lever moves smoothly and correctly into position.
(b) Start the engine and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.
If the operation is not as specified, inspect or adjust the park/neutral position switch assembly or transmission control cable assembly.
3. INSPECT SHIFT LOCK OPERATION
(a) Move the shift lever to P.
(b) Turn the engine switch off.
(c) Check that the shift lever cannot be moved from P to any other position.
(d) Turn the engine switch on (IG), depress the brake pedal, and check that the shift lever can be moved to another position.
If the operation is not as specified, inspect the transmission floor shift assembly.
Click here
4. INSPECT SHIFT LOCK RELEASE BUTTON OPERATION
(a) Move the shift lever to P.
(b) Turn the engine switch off.
(c) Remove the shift lock release button cover.
Click here
(d) When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Rear Drive Shaft Assembly: Disassembly
DISASSEMBLY PROCEDURE 1. SEPARATE REAR NO. 2 DRIVE SHAFT INBOARD JOINT BOOT CLAMP (a) Secure the drive shaft in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Using needle-nose pliers, disengage the 2 claws as shown in the illustration and separate the rear No. 2 drive s ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Wireless Charging System: Wireless Charger Illumination Circuit
DESCRIPTION When the light control switch is turned to the tail or head position, this circuit sends an illumination signal to the mobile wireless charger cradle assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the foll ...