ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE CAMSHAFT TIMING GEAR BOLT
Click here
2. INSPECT CAMSHAFT TIMING GEAR BOLT
(a) for intake side:
| (1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 4.5 mm (0.177 in.) or more HINT: When pressing the plunger, there may be a stepped feeling. This is not a malfunction. If the result is not as specified, replace the camshaft timing gear bolt. |
|
(b) for exhaust side:
| (1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 2.2 mm (0.0866 in.) or more HINT: When pressing the plunger, there may be a stepped feeling. This is not a malfunction. If the result is not as specified, replace the camshaft timing gear bolt. |
|
3. INSTALL CAMSHAFT TIMING GEAR BOLT
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Camshaft: Installation
INSTALLATION PROCEDURE 1. SET NO. 1 CYLINDER TO TDC (COMPRESSION) (a) Confirm that the timing mark (cutout) on the crankshaft pulley is aligned with the "0" timing mark of the timing chain cover assembly. *a Timing Mark (Cutout) *b "0" Timing Mark 2. SET CAMSHAFT TIM ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): Cornering Light Circuit
DESCRIPTION The No. 1 headlight ECU sub-assembly controls the cornering lights. WIRING DIAGRAM for Multiple Beam Headlight for Single Beam Headlight CAUTION / NOTICE / HINT NOTICE:
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle informati ...