Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Installation

NOTICE:

• If the mass air flow meter sub-assembly has been struck or dropped, replace it.
• If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
• Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

Inspection

INSPECTION PROCEDURE 1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY (a) Perform a visual check for any foreign matter on the intake air temperature sensor (thermistor) of the mass air flow meter sub-a ...

Relay

On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT INJECTOR RELAY (INJ) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connectio ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Steering Column: Tilt And Telescopic Manual Switch
InspectionINSPECTION PROCEDURE 1. INSPECT TILT AND TELESCOPIC SWITCH (a) Remove the tilt and telescopic switch. Click here *a Component without harness connected (Tilt and Telescopic Switch) (b) Measure the resistance according to the value(s) in the table below. Standar ...

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Left Rear Wheel Speed Sensor Signal Has Too Many Pulses (C050C3A,C05123A)
DESCRIPTION Refer to DTC C050C1F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area C050C3A Left Rear Wheel Speed Sensor Signal Has Too Many Pulses When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the skid c ...