Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (M-) - 2 (M+)

20°C (68°F)

0.3 to 100 Ω

If the result is not as specified, replace the throttle body with motor assembly.

*a

Component without harness connected

(Throttle Body with Motor Assembly)

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during thro ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL THROTTLE BODY GASKET (a) Install a new throttle body gasket to the intake air surge tank assembly with the protrusion of the throttle body gasket oriented as shown ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Headlight Ecu: Components
    COMPONENTS ILLUSTRATION *1 HEADLIGHT GASKET *2 NO. 1 HEADLIGHT ECU SUB-ASSEMBLY ● Non-reusable part - - ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Height Control Sensor: Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (a) Temporarily install the rear height control sensor sub-assembly RH with the 2 nuts. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} (b) Engage the guide. (c) Connect the rear height control sensor sub-assembly ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0107