REMOVAL
PROCEDURE
1. REMOVE COOL AIR INTAKE DUCT SEAL
Click here
2. REMOVE INLET AIR CLEANER ASSEMBLY
| (a) Remove the 2 bolts and inlet air cleaner assembly from the air cleaner case sub-assembly. |
|
3. REMOVE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY
| (a) Disconnect the 2 vacuum hoses from the No. 2 vacuum switching valve assembly. |
|
| (b) Disconnect the No. 2 vacuum switching valve assembly connector. |
|
(c) Remove the bolt and No. 2 vacuum switching valve assembly from the front engine mounting bracket.
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Power Seat Control System(for Third Row): Power Seat Motor Circuit
DESCRIPTION When a switch of the fold seat switch assembly or No. 1 fold seat switch assembly is pushed, the fold seat control ECU receives a switch operation signal and operates each motor. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
When a fold seat control ECU (RH/LH seat) is replaced, it ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Door Window Frame Moulding: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front door window frame moulding removal/installation are shown below. Necessary Procedures After Parts ...