DISASSEMBLY
PROCEDURE
1. REMOVE OIL PUMP RELIEF VALVE
| (a) Using a 27 mm socket wrench, remove the oil pump relief valve plug from the oil pump cover. |
|
(b) Remove the oil pump relief valve spring and oil pump relief valve from the oil pump cover hole.
2. REMOVE OIL PUMP COVER
| (a) Remove the 8 bolts and oil pump cover from the timing chain cover assembly. |
|
3. REMOVE OIL PUMP ROTOR SET
| (a) Remove the drive rotor and driven rotor from the timing chain cover assembly. |
|
Removal
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Bumper: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front bumper assembly removal/installation are shown below. Necessary Procedures After Parts Removed/In ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Power Outlet Socket (w/o Rear No. 2 Seat): Installation
INSTALLATION PROCEDURE 1. INSTALL REAR POWER OUTLET SOCKET COVER (a) Engage the 2 claws to install the rear power outlet socket cover as shown in the illustration. Install in this Direction 2. INSTALL REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY (a) Engage the claw to install the clamp to the N ...