INSTALLATION
PROCEDURE
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
| (a) Connect the connector. HINT: Make sure to install the skid control buzzer assembly in the correct direction. |
|
(b) Engage the clamp to install the skid control buzzer assembly.
NOTICE:
If the skid control buzzer assembly has been struck or dropped, replace it with a new one.
2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Differential Side Gear Shaft Oil Seal: Components
COMPONENTS ILLUSTRATION *1 REAR DRIVE SHAFT ASSEMBLY *2 REAR DRIVE SHAFT OIL SEAL *3 REAR DRIVE SHAFT SNAP RING *4 DIFFERENTIAL INSPECTION PLUG *5 REAR DIFFERENTIAL DRAIN PLUG *6 GASKET *7 REAR AXLE SHAFT NUT *8 REAR DIFFERENTIAL CARRIER ASSEMBLY Tighte ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Smart Access System With Push-button Start (for Entry Function): Dtc Check / Clear
DTC CHECK / CLEAR CHECK FOR DTC NOTICE: When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle ...