DESCRIPTION
When a malfunction is detected between various ECUs and sensors, these DTCs are stored.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
U010087 | Lost Communication with ECM/PCM "A" Missing Message | While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | 3 seconds after the engine switch is turned on (IG), while the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the yaw rate sensor assembly*1 or airbag sensor assembly*2 and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | 3 seconds after the engine switch is turned on (IG), a communication error between the steering sensor and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
U012987 | Lost Communication with Brake System Control Module Missing Message | 3 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
U014087 | Lost Communication with Body Control Module Missing Message | 3 seconds after the engine switch is turned on (IG), a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
PROCEDURE
1. | CHECK FOR DTCs |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs(b) Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs.
Chassis > Front Recognition Camera > Trouble CodesOK:
DTCs are not output.
OK | USE SIMULATION METHOD TO CHECK |
NG | GO TO CAN COMMUNICATION SYSTEM |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Air Conditioning System: Exhaust Gas Sensor Circuit (B1418/18)
DESCRIPTION The smog ventilation sensor is installed to the front of the cooler condenser assembly to automatically control the air inlet mode (fresh, recirculation/fresh, and recirculation). This sensor detects HC and CO in the ambient air and transmits signals to the air conditioning amplifier ass ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Oil Pump: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during engine unit removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Rep ...