COMPONENTS
ILLUSTRATION
*1 | BACK DOOR LOCK COVER | *2 | BACK DOOR TRIM BASE |
*3 | BACK DOOR TRIM COVER LH | *4 | BACK DOOR TRIM COVER RH |
*5 | BACK DOOR TRIM PANEL ASSEMBLY | *6 | BACK WINDOW UPPER PANEL TRIM |
*7 | DOOR PULL HANDLE | *8 | NO. 1 AMPLIFIER ANTENNA ASSEMBLY |
*9 | NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY | - | - |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Height Control Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (a) Temporarily install the rear height control sensor sub-assembly RH with the 2 nuts. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} (b) Engage the guide. (c) Connect the rear height control sensor sub-assembly ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Rear Combination Light Assembly (w/o Rear No. 2 Seat): Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE REAR COMBINATION LIGHT CAP (for LED Type Turn Signal Light) (a) for TMMC Made: (1) Remove the rear combination light cap. HINT: Use ...