CUSTOMIZE PARAMETERS
CUSTOMIZING WITH REMOTE TOUCH (REMOTE OPERATION CONTROLLER ASSEMBLY)
(a) Customizing with the touch function cancellation function.
NOTICE:
Confirm the touchpad surface is free of foreign matter before customizing.
(1) Turn the engine switch on (ACC).
(2) Simultaneously press and hold the "MAP" switch and back switch for 5 seconds or more.
| *a | "MAP" Switch |
| *b | Back Switch |
(3) While pressing and holding the "MAP" switch and back switch, tap the touchpad with 2 fingers.
| *a | Example |
HINT:
(4) Confirm that the answer-back function vibrates the touchpad a specified number of times to indicate that the setting has changed.
Setting| Touch Function Cancellation Function | Number of Answer Back Vibrations |
|---|---|
| Off (Default) | 1 |
| On | 2 |
(5) Repeat step (3) until the desired setting is selected.
HINT:
The touch function cancellation function alternates between on and off.
(6) Release the "MAP" switch and back switch to select the set value.
System Description
Problem Symptoms TableLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): Terminals Of Ecu
TERMINALS OF ECU CHECK MULTIPLEX NETWORK DOOR ECU (a) Disconnect the Z16 and Z17 multiplex network door ECU connectors. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Terminal ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Steering Ecu: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the power steering ECU assembly removal/installation are shown below. Necessary Procedure After Parts Remo ...