FAIL-SAFE CHART
MALFUNCTION DETECTION
(a) Operation when malfunction is detected
Content | Operation | |
---|---|---|
Heater failure | Overcurrent detection of drive element | Heater output off |
Overheating detection of drive element | Heater output off | |
Power failure | Low-voltage detection | Heater output off |
Over-voltage detection | Heater output off | |
Heater OFF timer | 30 minutes after heated steering wheel system is turned on | Heater output off |
(b) Malfunction detection conditions
(1) When an open or short in the steering wheel heater unit thermistor continues for 2 seconds or more.
(2) When the steering heater switch is pressed continuously for 10 seconds or more.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Torque Control Awd System: Low or High Power Supply Voltage (C1241)
DESCRIPTION If a malfunction in the power source circuit occurs, or a communication malfunction with the skid control ECU (brake actuator assembly) or speed sensor occurs, the 4WD ECU assembly prohibits operation. DTC No. Detection Item DTC Detection Condition Trouble Area C1241 Low o ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Fail-safe Chart
FAIL-SAFE CHART FAIL-SAFE FUNCTION (a) When communication fails in any of the CAN bus lines (communication lines), a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning. (b) The following table shows the e ...