CUSTOMIZE PARAMETERS
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.
(5) Select the setting by referring to the table below.
Tilt & Telesco| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Autoaway/Return function | Turn the auto away/return function | ON | 00000000:ON,01010101:OFF | Multiplex tilt and telescopic ECU |
Vehicles Speed Malfunction (B2624)
Data List / Active TestLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Millimeter Wave Radar Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Rep ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): PBD Unit Pulse Sensor RH Circuit (B2227)
DESCRIPTION This DTC is stored when the multiplex network door ECU detects an error in the power back door unit assembly set RH pulse signal. DTC No. Detection Item DTC Detection Condition Trouble Area B2227 PBD Unit Pulse Sensor RH Circuit Multiplex network door ECU detects power b ...