DESCRIPTION
The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and position control ECU and switch assembly LH via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0142 | Lost Communication with Main Body ECU | Lost communication with main body ECU (multiplex network body ECU) |
|
| U0208 | Lost Communication with "Seat Control Module A" | Lost communication with position control ECU and switch assembly LH |
|
PROCEDURE
| 1. | GO TO CAN COMMUNICATION SYSTEM |
(a) Go to CAN Communication System.
Click here
| NEXT | | END |
Tilt and Telescopic Manual Switch CircuitLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Center Seat Outer Belt Assembly(w/ Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear center seat outer belt assembly removal/installation are shown below. Necessary Procedure After Par ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Meter / Gauge System: Speedometer Malfunction
DESCRIPTION The combination meter assembly receives vehicle speed signals from the brake actuator assembly (skid control ECU) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the brake actuator assembly (skid control ECU). The brake actuator assemb ...