Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Reassembly

NOTICE:

• Do not drop the power steering ECU assembly, strike it with tools or subject it to impacts.
• If the power steering ECU assembly is subjected to an impact, replace it with a new one.
• Do not pull the wire harness.
• Do not allow any moisture to come into contact with the power steering ECU assembly.
• Do not loosen any bolts not mentioned in the procedure.
• Do not allow any foreign matter to contaminate the power steering ECU assembly.

Installation

INSTALLATION PROCEDURE 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 2. INSTALL STEERING COLUMN ASSEMBLY NOTICE: Make sure that the wire harness is not interfering with the steering column assembly. (a) ...

Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the el ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Can Communication System: Check Bus 3 Line for Short to GND
DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 6 (CA3H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 21 (CA3L) of the network gateway ECU and terminal 4 (CG) of the DLC3. Symptom Trouble A ...

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Ultrasonic Sensor (for Front): Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT CENTER ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 4 (BI) - 6 (EI) Always 10 kΩ or higher 4 (BI) - 1 (BO) Always Below ...