INSTALLATION
PROCEDURE
1. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Engage the 2 claws and 2 pins to install the steering pad switch assembly.
(b) Install the 2 screws.
Torque:
2.4 N·m {24 kgf·cm, 21 in·lbf}
(c) Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
2. INSTALL HORN BUTTON ASSEMBLY
Click here
Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): Cornering Light Circuit
DESCRIPTION The No. 1 headlight ECU sub-assembly controls the cornering lights. WIRING DIAGRAM for Multiple Beam Headlight for Single Beam Headlight CAUTION / NOTICE / HINT NOTICE:
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle informati ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Seat Assembly (for 60/40 Split Seat Type Rh Side): Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL REAR SEAT ASSEMBLY RH (a) Place the rear seat assembly RH in the cabin. NOTICE: Be careful not to damage the vehicle body. (b) Lift the seat track adjusting ...