DESCRIPTION
The power steering ECU assembly receives signals from the ECM, skid control ECU (brake actuator assembly) and forward recognition camera (w/ forward recognition camera system) via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | Lost communication with ECM |
| EPS warning light: Does not come on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
| U0129 | Lost Communication with Brake System Control Module | Lost communication with skid control ECU (Brake actuator assembly) |
| EPS warning light: Comes on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
| U023A | Lost Communication with Front Camera Module | Lost communication with forward recognition camera |
| EPS warning light: Comes on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
PROCEDURE
| 1. | GO TO CAN COMMUNICATION SYSTEM |
(a) Go to CAN communication system.
Click here
| NEXT | | END |
Terminals Of Ecu
Steering ColumnLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (C006328,C006396)
DESCRIPTION for Optitron Meter Type:
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
for TFT Meter Type:
These DTCs are stored when the skid control ECU (bra ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Smart Access System With Push-button Start (for Start Function): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect ...