CAUTION / NOTICE / HINT
HINT:
Use these procedures to troubleshoot the heated steering wheel system.
PROCEDURE
| 1. | VEHICLE BROUGHT TO WORKSHOP |
|
| 2. | INSPECT BATTERY VOLTAGE |
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
|
| 3. | PROBLEM SYMPTOMS TABLE |
| Result | Proceed to |
|---|---|
| Fault is not listed in problem symptoms table. | A |
| Fault is listed in problem symptoms table. | B |
| B | | GO TO STEP 5 |
|
| 4. | OVERALL ANALYSIS AND TROUBLESHOOTING |
(a) Terminals of ECU
Click here
|
| 5. | REPAIR OR REPLACE |
|
| 6. | CONFIRMATION TEST |
| NEXT | | END |
Fail-safe Chart
Parts LocationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: VSC OFF Switch Circuit
DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication. Pressing the VSC OFF switch (combination switch assembly) turns off TRAC operation, and pressing and holding this switch turns off TRAC and VSC operation. If TRAC and VSC ...