PARTS LOCATION
ILLUSTRATION
| *1 | TILT AND TELESCOPIC SWITCH | *2 | ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY (TILT STEERING GEAR ASSEMBLY W/ MOTOR) - TELESCOPIC MOTOR - TILT MOTOR |
| *3 | COMBINATION METER ASSEMBLY | *4 | MULTIPLEX TILT AND TELESCOPIC ECU |
| *5 | DLC3 | *6 | MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
| *7 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - TI & TE FUSE - ECU-IG1 NO. 1 FUSE | - | - |
ILLUSTRATION
| *A | w/ Seat Memory | - | - |
| *1 | SEAT MEMORY SWITCH LH | *2 | POSITION CONTROL ECU AND SWITCH ASSEMBLY LH |
| *3 | OUTER MIRROR CONTROL ECU ASSEMBLY (DRIVER DOOR) | - | - |
IG Power Source Circuit
PrecautionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Pre-collision System: Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision System / Trouble Codes. Body Electrical > Pre-Collision System > Trouble Codes (e) Check for DTCs ( ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Airbag Sensor(w/o Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear airbag sensor removal/installation are shown below. Necessary Procedure After Parts Removed/Insta ...