TERMINALS OF ECU
TERMINAL INSPECTION
*a | Component without harness connected (Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly)) | - | - |
(a) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) | Input/Output | Wiring Color | Terminal Description | Condition | Specified Condition | Related Data List Item |
---|---|---|---|---|---|---|
L1-1 (GND) - Body ground | - | W-B - Body ground | Ground* | Always | Below 1 Ω | - |
L1-3 (IGE) - L1-1 (GND) | Input | SB - W-B | Steering lock motor activation command signal (motor activation command signal sent from certification ECU (smart key ECU assembly)) | Any door opened when conditions below met, and then steering lock motor activated:
| Pulse generation (see waveform) | Smart Access
|
L1-4 (SLP1) - L1-1 (GND) | Output | GR - W-B | Steering lock bar position signal (output signal from steering unlock sensor) | Steering locked → unlocked | 11 to 14 V → Below 1.5 V | Smart Access
|
L1-5 (LIN) - L1-1 (GND) | Input/Output | R - W-B | LIN communication line | - | - | Smart Access
|
L1-6 (IG2) - L1-1 (GND) | Input | P - W-B | Power source mode signal (IG2 power supply input for entire steering lock actuator or upper bracket assembly)* | Engine switch off → engine switch on (IG) | Below 1 V → 11 to 14 V | - |
L1-7 (B) - Body ground | Input | V - Body ground | Power source* | Always | 11 to 14 V | - |
NOTICE:
There is 1 motor and 2 sensors built into the steering lock actuator or upper bracket assembly.
HINT:
(1) Waveform
*a | Steering Lock Motor not Operating |
*b | Steering Lock Motor Operating |
Item | Content |
---|---|
Tester Connection | L1-3 (IGE) - L1-1 (GND) |
Tool Setting | 2 V/DIV., 200 ms./DIV. |
Vehicle Condition | Steering lock motor not operating → Operating → Not operating |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Vehicle Stability Control System: Test Mode Procedure
TEST MODE PROCEDURE ACTIVATE DEALER MODE (SIGNAL CHECK) HINT:
Signals related to the vehicle stability control system can be inspected by performing a Dealer Mode (Signal Check) inspection. During the inspection, the display of items determined normal by the skid control ECU (brake actuator assem ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Airbag System: Curtain Shield Airbag Sensor (RH) (B1630,B1632)
DESCRIPTION The side collision sensor RH circuit (bus 1) consists of the airbag sensor assembly, door side airbag sensor RH and rear airbag sensor RH. The door side airbag sensor RH and rear airbag sensor RH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if ...